How To Solve The Blockage Of Trommel Screen?

Date: 2025-02-24     From: Longding     Author: admin

Solve the problem of trommel screen clogging include optimizing material properties, improving screen structure, optimizing material pretreatment process, and regularly inspecting and maintaining equipment.

Methods to solve the blockage of the trommel screen

1. Optimize material properties

A. For materials with too large particle size, crushing can be performed to make the material particle size meet the requirements of the drum screen.

B. For materials with high humidity, drying equipment can be used to dry the materials to reduce the humidity of the materials.

C. For materials with strong viscosity, the viscosity of the materials can be reduced by adding an appropriate amount of water.

2. Improve the screen structure

According to the characteristics of the material, select the appropriate screen aperture and material. For materials with larger particle size, a screen with larger aperture can be selected; for materials with higher humidity, a screen material with better corrosion resistance can be selected; for materials with strong viscosity, a screen material with better anti-sticking performance can be selected.

3. Optimize the material pretreatment process

The material pretreatment process is also very critical to reduce the problem of drum screen blockage. Before the material enters the drum screen, it can be pretreated, such as crushing, washing, etc., to remove large impurities in the material and reduce the risk of screen blockage. In addition, wet screening can be performed. By adding water and stirring the material, the particles of the material that are difficult to screen can be softened to reduce the possibility of blockage.

4. Regularly check and maintain equipment

Regularly checking and maintaining equipment is one of the key measures to prevent the drum screen from blocking the screen. Regularly check whether the various parts of the drum screen are operating normally and whether there is abnormal wear, and replace the worn parts in time to ensure the normal operation of the equipment.