Features of Cyclones and Methods of Use

Date: 2021-04-28     From: Longding     Author: admin

As a kind of separation and classification device, the cyclone has played a very important role in modern industrial production and has become an indispensable equipment. But not all people have a comprehensive understanding of cyclones. Based on years of cyclone sales experience, our company will introduce you to the structural features and use tips of cyclones.

1. According to different site conditions, the feeding method of the cyclone can be divided into involute linear feeding, spiral feeding, and tangential feeding, especially the spiral feeding method is most used. Because under the same conditions, this method has the characteristics of strong processing capacity and low pressure.

2. The flocculation phenomenon caused by the increase of the volume will occur when the material is fed, which will have a bad influence on the classification efficiency of the cyclone, and will also increase the energy loss of the material. In order to avoid these undesirable effects, thick-walled overflow pipe devices can be used.

3. According to different working conditions and requirements for finished products, the length of the cylindrical body of the cyclone can be adjusted at will, so as to ensure that the cyclone reaches the best working condition.

4. The swirler is designed with a different diameter to cone ratio and pyramid ratio. It can make the cyclone have the maximum tangential velocity, while reducing the energy loss, can achieve the best classification results. Using this design and technology, one large-diameter cyclone can be used instead of multiple small-diameter cyclones, which can save costs.

5. In order to improve the classification accuracy of the cyclone, a rectangular tapered feeding tube can be used to gradually increase the flow speed of the slurry, so that the flocculation state gradually becomes a laminar flow state.

Understanding the characteristics and tips of the cyclone can achieve a multiplier effect with half the effort when using the cyclone. The hydrocyclones are divided into hydraulic classification cyclones for mines, heavy medium separation cyclones for coal, concentration classification cyclones for chemical power plants, etc.