Hot Product
- Hydrocyclone Group
Hydrocyclone group is widely used in coal preparation plant...
- Slurry Pump
Slurry pump is mainly used in mining, power plant, dredging, metallurgy...
- Polyurethane Dewatering Screen Panel
In addition to the performance of...
How To Reduce The Corrosion Of Slurry Pump?
Date: 2022-08-21 From: Longding Author: admin
Slurry pumps are mainly used in concentrators in the mining industry, mainly dealing with the primary selection of ore. The wear of the slurry pump will be relatively serious, so its service life is relatively low. According to the hardness and particle size of the processed ore, the abrasiveness of the slurry pump will also be different.
When the slurry pump is dealing with slurry with many impurity particles, such as removing slurry, a filter screen can be placed at the water inlet. This can reduce the impurity particles entering the pump body, reduce the probability of sticking to the pump, and prolong the service life of the slurry pump. The use time of the slurry pump should not be too long. If there is a spare pump, it is best to take turns to work.
During the working process of the slurry pump, the pump body should be placed on the ground to keep the pump body stable. If it is a slurry pump that needs to work underwater, such as a slurry pump or a submerged slurry pump, the pump must be placed in the water due to its structure. At this time, the motor needs to be placed on the water surface and fixed to keep the slurry pump. of stability.
Some of the slurry pumps use mechanical seals. The use of this type of slurry pump must ensure the supply of shaft seal water, and it is strictly forbidden to operate in an anhydrous state to avoid the burning of the mechanical seal due to dry grinding. Generally, the mechanical seal slurry pump should be connected to the shaft seal water before use, and the water supply should be maintained for at least 3 minutes after the pump is stopped.
How does the slurry pump handle harder mud?
When dealing with the hard mud layer of underwater mud, it is impossible to achieve the operating conditions with a single ordinary pump for pumping mud. When dealing with these special hardness sediment layers, the submersible method should be used to extract deeper mud layers and break the soil. It is recommended to use the submersible slurry pump.
Leave a Message
Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.
Inquiry