The Installation Method Of Vibrating Motor In Vibrating Screen

Date: 2023-04-07     From: Longding     Author: admin

The vibrating screen is mainly composed of a screen box, screen frame, screen mesh, vibration motor, motor base, vibration damping spring, bracket, and other parts. Among them, the vibration motor is an indispensable part of the vibrating screen. According to the site and materials, the vibration motor can be installed in three ways: bottom, both sides, and top. The following is a detailed description of the three common installation methods of the vibrating motor of the vibrating screen.

1. Installed at the bottom of the vibrating screen

This is the most common way to install the vibrating motor on the linear vibrating screen. This installation method is safe and reliable, and saves space. This installation method not only ensures the effective screening area of the equipment, does not affect the processing capacity and screening efficiency, but also greatly reduces the overall width of the linear screening equipment.

2. Installed on both sides of the vibrating screen

This installation method is also a relatively common method for installing vibrating screen vibrating motors. Typically used when there is a constraint on the overall height of the device, but no constraint on the width of the device. For example, due to the special requirements of some materials, the discharge port of the equipment should not be too high from the ground. If the vibrating motor is still installed at the bottom of the vibrating screen, the overall height of the equipment is not easy to control. The vibrating motor is installed on both sides of the vibrating screen, which can reduce the overall height of the equipment, and improve its working efficiency of the equipment.

3. Installed on top of the vibrating screen

This installation method is adopted when the height and width of the outlet of the linear screen equipment are limited. If the vibration motor cannot be installed on the bottom or on both sides to meet the requirements, the vibration motor can be installed in the middle of the top of the equipment. In this way, the width of the device will not be increased, and the height of the discharge port of the device will not be affected.

The above three vibration motor installation methods are the more commonly used installation methods for vibrating screens. Users can make comprehensive references according to the actual situation.